T680

Features

  • Five-channel time-interval counter and time stamper
  • Five channels usable as TIC start plus four stops, or five time stampers
  • Common GATE input
  • 1023 sample FIFO per channel
  • External universal power supply or 12-volt DC power
  • 100 Mbit Ethernet and USB interfaces
  • Compact extruded enclosure with optional mounting flange

- Datasheet

gft2002

Features

  • Two Channels (Start, Stop)
  • 1ps one-shot time resolution
  • < 10ps rms time interval jitter
  • ± 1 second time interval range
  • 19’’, compact Pci rack,
  • Ethernet interface,

- Datasheet

GT668

Features

  • DC - 2.7 GHz input Frequency range
  • Very Low noise floor
  • High Accuracy and measurement speed 4M m/s per channel
  • Two programmable Inputs
  • UTC Synchronizable with 1 PPS
  • Complete instrument on one card
  • Easy expandable for building complete PXI/PXIe systems
  • Easy to integrate in ATE systems

- Datasheet

T4100

Features

  • Precise and versatile counter powered and controlled via USB part
  • 0 – 1000 seconds Time Interval range
  • < 10 ps precision (standard deviation
  • up to 3.5 GHz frequency range
  • up to 5.105 measurement rate /second
  • Measurement of Allan Deviation (ADEV)
  • Selectable pulse edge polarity
  • Selectable input threshold level or automatic threshold search
  • Comprehensive statistical data processing
  • User-friendly software for Windows an drivers for user’ application
  • Easy export of data files for processing in other programs (Stable 32, MS Excel)

- Datasheet

FeaturesMTC108 photo

  • Eight precise measurement channels
  • >1 hour Time interval measurement range
  • <6.5 ps Precision (Standard deviation) at time interval measured from 0 to 1 ms
  • Up to 3.5 GHz frequency range
  • 11.106 time stamps./s per channel measurement rate
  • Five time measurement modes that increase precision or measurement rate
  • Measurement of Allan Deviation (ADVE), Time Interval Error (TIE), Maximum Time Interval Error (MTIE) and Time Deviation(TDEV)
  • User friendly front panel interface
  • Remote control with use of USB/Ethernet/RS-232/RS-485 interfaces

- Datasheet

GFT2505

Features

  • 4 channel common start TDC with 8ps resolution
  • Range: 109.22 µs (24 bit timestamp)
  • Maximum start rate: 4 MHz
  • L0 FIFO: 16 words/channel
  • L1 FIFO: 512 words/channel
  • L2 FIFO: 10000 words
  • PCIe 1x 1.0 with 200 MB/s throughput

- Datasheet

GFT2609

Features

  • 8 NIM compatible inputs on LEMO connectors with 25ps bin size
  • 1 NIM compatible inputs on LEMO with 12.8ns bin size
  • 12 LVCMOS inputs on SUB-D connector with 12.8 ns bin size
  • < 5ns typical dead time between multiple hits on one channel
  • Unlimited number of hits per trigger
  • No dead time due to readout, new data is acquired during readout
  • 4M Hits/second readout rate
  • 419 µs range w. trigger logic enabled
  • 2h range without trigger logic enabled
  • Adjustable windows (size, position of trigger) incl. common start and common stop
  • Easy to use windows driver
  • On board storage for calibration data
  • Support for up to three event-synchronized boards
  • 5V, 32-bits, 33MHz PCI target device

- Datasheet

GT668

Features

  • DC - 2.7 GHz Frequency range
  • Up to 0.9ps Time Resolution Single Shot
  • Very Low noise floor
  • Extremely High Throughput
  • Expandable to 17 cards, 34 synchronized channels
  • Built-In NIST traceable Time Base
  • Unbeatable accuracy, flexibility and measurement speed
  • Easy expandable for building complete PXI/PXIe test systems
  • Easy to integrate in ATE systems

- Datasheet

GT916

Features

  • Active multiplexer for time and frequency measurements
  • DC to 6 GHz Frequency range
  • 16 single ended or 8 differential inputs
  • 2 differential outputs driving 50Ω termination to ground
  • A common input signal for both outputs software selectable
  • -5V to +5V Input voltage range
  • PXI or PXIe interface, 1 slot, 3U form factor
  • SMP connectors for all input and output

- Datasheet

GT9000 test plateform

Features

  • Small-Size Portable
  • DC - 2.7 GHz Frequency range
  • Up to 0.9ps Time Resolution Single Shot
  • Very Low noise floor
  • Extremely High Throughput
  • Expandable to 24 synchronized channels
  • Built-In NIST traceable Time Base
  • Unbeatable accuracy, flexibility and measurement speed
  • Easy to integrate in ATE systems

- Datasheet

GT9001

Features

  • Small size portable
  • 20ps Time interval accuracy (channel A to B)
  • Very Low noise floor
  • 4M Sa/s maximum measure Rate
  • Built-In NIST Traceable Time-Base
  • Seamless transition from R&D Lab to device characterization
  • Unbeatable accuracy, flexibility and measurement speed
  • Easy to integrate in ATE systems

- Datasheet